Print Job Control Module - Oce Arizona 6160 XTS User Manual

Print Job Control Module

Print Job Control Module
Introduction
Print Job Control is the first module displayed when the printer software is loaded. From this
module you can manage all aspects of working with print jobs and also control many features of
the printer. The table "Job Control Panels" documents the numbered callouts and the rest of this
section explains each of these areas in more detail.
The Print Job Control display is divided into functional and status areas. The functional areas
supports all operator input necessary to operate, maintain and service the printer. The status
areas are used to report image and printer status.
Print Job Control
Components of the Print Job Control Module
Component
1) Job and Printer Sta-
tus
2) Printer Messages
Panel
3) Ink System Status
4) Command
Toolbar left
5) Command Toolbar
right
6) Active Jobs List
7) Job Placement Pre-
view
50 Chapter 3 ‐ How to Navigate the User Interface
Function
Displays the status and progress of print jobs.
Displays the last four lines of the log - click in this area to see more of
the log.
Ink System Status icon - click to view an ink status report.
Displays icons for actions related to the print jobs and control of the
printer table.
Displays icons for ink temperature, lamp control, vacuum pump A & B,
move the gantry, start/pause print jobs, and print a nozzle check.
Displays a list of all Active print jobs.
Displays the selected print job(s) with a preview that shows the place-
ment of that job on the printer.
4
Océ Arizona 6100 Series