Oce Arizona 6160 XTS User Manual page 63

[16] Special Prints
How to Load a Special Print
1) Click a Special print to select it in the bottom window.
2) Click the Add button to place it on the top to add it to the print queue.
That special print is now available in the Active job list of the Print Job Control module.
How to Print a Special Print
Go to the Print Job Control module to actually print the special print. It will appear in the active
job list and is printed like any other print job.
NOTE
Refer to the sections that document the special prints for details on printing. For example, the
Nozzle check print is documented in "Manual Printhead Maintenance" in Chapter 10. Note that
some of the special prints are meant for service technicians only and are not for use by the
printer operator.
Shutdown
Use the Shutdown icon when you need to turn the printer power off. The printer should be left
powered On at all times but there are exceptions such as some service procedures, or if the
printer requires a reboot. Refer to the section "How to Prepare the Printer for Idle Periods" in
Chapter 4.
System Logs
The System Logs are raw data log files for service diagnostics and troubleshooting purposes.
They are meant for service technicians to help with troubleshooting. Generate system logs only
Océ Arizona 6100 Series
Tools and Utilities Module
Chapter 3 ‐ How to Navigate the User Interface 63