Oce Arizona 6160 XTS User Manual page 105

[26] New Swatch
[27] New Swatch Name
• Name – Enter the name Spot 1 or Spot 2.
Note: For instructions on how to use a naming convention other than Spot 1 or Spot 2, refer to
the sub-section at the end of this section "Naming Your Spot Data".
• Color Type – Use the drop-down menu to select Spot Color.
• Swatch Color – Use the sliders to adjust the swatch color. You can make this color any value
that will help you see the design better.
5.
Click OK to save your changes and close the Add Swatch dialog. You should now have a new
Spot color in your swatch palette, which is indicated with a small dot on bottom right side of
swatch.
[28] Color Swatch
6. Use the new swatch for any objects or fills which need to be printed with white ink. Clicking on
new spot color swatch will make this the default fill color for this document. Select element you
would like to be treated with Spot information and choose the fill swatch. See the example below.
Océ Arizona 6100 Series
How to Prepare Spot Data in Adobe Illustrator
[29] Spot Swatch
Chapter 7 ‐ How to Manage a White Ink Workflow 105