Oce Arizona 6160 XTS User Manual page 51

Component
8) Inactive Jobs
9) Job Information
and Parameters panel.
10) Interface Tabs
11) Software Version
Number and Image
Upload Progress
Job Control Components Explained
1) Job and Printer Status Panel
The job status panel is in the top left corner of the display screen. It shows information about the
current state of the printer or job activities.
• Printer Status
• Job name currently printing
• Total copies, number of printed copies and copy progress
• Overprint progress and number of overprints if more than zero
All incoming jobs go directly into the job list or job queue.
Selecting a job in the list highlights the job and updates the job information area.
The job information area contains offsets, print quality mode information, number of copies and
overprints, and the name of the ONYX profile used and the image to be printed is also displayed.
Jobs can be moved up or down in the list and can either be printed, held or canceled.
2) Printer Messages (or Log) Panel
The printer status panel is in the top right corner of the display. It shows the last four lines of the
printer log that contains printer errors, warnings, and information messages. To see more of the
log, click on the panel to bring up a new window that allows you to scroll through the log.
3) Ink Status. Displays the current status of all ink bags.
Pause/Resume print button. This button can be used to pause or resume a print job. It is active
only while a job is printing.
NOTE
Use of the Pause/Resume button may cause artifacts in a print because of the uneven curing of
the ink if the job is paused. Do not use this unless it is essential that the print job is paused.
Ink System Status. Click the icon to open an ink system status dialog that displays ink-related
information. This includes, for each color of ink: an expiry date, ink type code, ink bag status, fill
status (whether ink is being pumped into the reservoir), and whether the reservoir is full. The
dialog also shows the current printhead temperature, the meniscus vacuum level, and the purge
pressure.
4 & 5) Command Toolbar
The toolbar contains icons that allow you to interact with the printer (icons are listed in the table
below in the order they are displayed on the command toolbar). Note that some of the icons have
a checked and unchecked state with a different appearance of the icon image to reflect their state.
Océ Arizona 6100 Series
Function
Displays a list of all Inactive print jobs.
This panel shows the parameters of the currently selected print job and
also allows changes to the parameters associated with that job.
Use these tabs to select the different modules of the printer user inter-
face.
Displays the current installed version of the printer software.
The image upload progress panel indicates the name of a print job that
is currently uploading to the printer. This panel is not always visible
and appears only when an image is loading to the printer. It is located
below the software version number when it is active.
Chapter 3 ‐ How to Navigate the User Interface
Print Job Control Module
51