Oce Arizona 6160 XTS User Manual page 74

How to Set Up a Print Job
NOTE
When the ink is at a low room temperature it may take up to 20 minutes for it to warm up to
operating temperature. The printer will not print until the ink warms up. Also, when the printer is
idle it will maintain the ink at operating temperature for two hours.
Note: The image is printed towards the print origin instead of away from it (i.e., the last data line
to be printed is the line at the print origin). The reason the image is printed in this direction is to
allow the gantry to lead the image in the print direction so it does not block the image when it
starts printing. Also it reduces the time it takes for the gantry to start the print.
74 Chapter 4 ‐ How to Operate Your Océ Arizona Printer
Océ Arizona 6100 Series