Oce Arizona 6160 XTS User Manual page 20

Océ Arizona 6100 Series Safety Labels
Description
General Warning
Located on the AC enclosure cover. This area can only be
accessed by a trained service technician.
Pinch Point
A reminder that horizontal movement of the carriage can
create a pinch hazard as it moves along the gantry.
Located on both ends and the rear of the carriage.
Crush Hazard: Keep hands clear while operating.
A reminder that vertical movement of the carriage can be
a crush hazard if hands or objects are placed in these loca-
tions. Located on the maintenance station and both ends
of the gantry.
Thermal Hazard
Radiated heat from the UV lamps can cause burns.
Located on the carriage near the two UV lamps.
Caution: For Continued Protection Against Fire And Elec‐
tric Shock
Replace Only With Same Type and Ratings of Fuse
Caution: Disconnect Power Before Changing Fuse.
Refer to the section "How to Power the Printer On and Off"
Electrical Shock Hazard Equipment
Powered by two power cords.
Turn off power switch or remove both power cords before
servicing
Refer to the section "How to Power the Printer On and Off"
Warning: High Leakage Current Earth Connection Essen‐
tial Before Connecting Supply
Refer to the Arizona Printer Site Preparation Guide.
Danger: High Voltage
Warning that High Voltage is present behind marked pan-
el.
20 Chapter 2 ‐ Safety Information
Label
[3] Disconnect Power
[4] Electrical Shock Hazard
[5] High Leakage Current
[6] High Voltage
Océ Arizona 6100 Series
4