Specifying Your Audio Output Settings - Matrox MXO2 Installation And User Manual

62
From the Set component output to menu, select YUV or RGB to set the
11
type of video that is sent from MXO2's component (Y, Pb, Pr) output. For
example, select RGB if your MXO2's component output is connected to a
device that accepts an RGB signal.
¦ Note
Click the Calibrate button to calibrate your HDMI monitor or load HDMI
12
calibration settings using the Matrox HDMI Calibration Utility (see
8, "Calibrating Your HDMI Monitor for
¦ Note
type must be set to RGB - calibrated (see step 10).

Specifying your audio output settings

MXO2's simultaneous audio outputs allow you to send your audio to a variety of
devices at the same time. You can also map any audio track in your video
application to any MXO2 audio output. For descriptions of the MXO2 outputs,
see "Outputs"
¡ Important Audio mapping must be disabled for surround sound HDMI audio
output.
From the Apple menu, click System Preferences , and then click the
1
Matrox Utilities
Chapter 7, Configuring Your MXO2 System
Component outputs are not available on MXO2 Mini.
In order to run the Matrox HDMI Calibration Utility, the HDMI output
on page 165.
icon.
Video").
Chapter