Specifying Your Matrox Wysiwyg Settings - Matrox MXO2 Installation And User Manual

70
$
$
$
¦ Note
must set the output that is connected to your monitor to SD (see
your video output settings"
21 (SD)
Specify the appropriate settings in your video application. For information
7
on how to set your video application settings to capture, play back, and
export Matrox 4VANC closed captioning, see
MXO2 with Supported

Specifying your Matrox WYSIWYG settings

The Matrox WYSIWYG settings configure the MXO2 video output when
working with Adobe After Effects and Photoshop only (see
Matrox MXO2 with Supported
From the Apple menu, click System Preferences , and then click the
1
Matrox Utilities
Chapter 7, Configuring Your MXO2 System
Embed in SDI VANC (HD/SD)
back HD or SD video from MXO2's SDI output, and embed the closed
captioning data in your video's VANC.
Embed in SDI Line 21 (SD)
SD video from MXO2's SDI output, and embed the closed captioning
data on Line 21 of the VBI (vertical blanking interval) portion of your
video signal.
Embed in analog Line 21 (SD)
back SD video from any of MXO2's analog outputs (component, S-Video,
and composite), and embed the closed captioning data on Line 21 of the
VBI (vertical blanking interval) portion of your video signal.
To preview HD video with closed captioning on an SD monitor, you
or Embed in analog Line 21 (SD) .
icon.
Use this option if you want to play
Use this option if you want to play back
Use this option if you want to play
on page 58), and select either Embed in SDI Line
Programs."
Programs").
"Specifying
Chapter 9, "Using Matrox
Chapter 9, "Using