Specifying Your Audio Output Settings - Matrox MXO2 Installation And User Manual

Click the Calibrate button to display proc amp controls that you can use to
10
calibrate your HDMI monitor for video (see
HDMI Monitor for

Specifying your audio output settings

MXO2's simultaneous audio outputs allow you to send your audio to a variety of
devices at the same time. You can also map any audio track in your application to
any MXO2 audio output. For descriptions of the MXO2 outputs, see
on page 94.
From the Apple menu, click System Preferences , and then click the
1
Matrox MXO2
Click Audio Output .
2
¦ Note The available MXO2 audio outputs depend on your MXO2 hardware.
Select or clear the Enable audio mapping option. If this option is cleared,
3
your application's audio track outputs will be routed to the corresponding
MXO2 audio outputs by default. For example, when you output audio tracks
as Pair 1/2 from your application, the audio will be routed to the
corresponding 1/2 MXO2 audio outputs.
If you selected the Enable audio mapping option, for each of the MXO2
4
outputs, select the desired audio pair from your application.
Video").
or Matrox MXO2 Mini icon.
Chapter 7, "Calibrating Your
"Outputs"
Defining your MXO2 settings
49