Adding A Voice-Over To Your Sequence - Matrox MXO2 Installation And User Manual

To capture AFD and/or closed caption data, in Avid's Capture tool, enable
all 16 audio channels, set audio channels 15 and 16 to Mono , and select 1:1
from the Res list.
MXF
¦ Note Matrox 4VANC is not available on Matrox MXO2 Mini.
Click the Hardware Setup (
5
preferences window, and specify your Matrox capture settings as described
in "Specifying your A/V input settings"
Matrox 4VANC AFD and/or closed caption data, you must enable Matrox
4VANC capture in the Matrox Utilities preferences window as described in
"Matrox 4VANC capture and playback"
Capture as you would normally.
6

Adding a voice-over to your sequence

Matrox MXO2 supports the Audio Punch-In tool, which allows you to record
audio directly into the Timeline to add voice-over narration, such as to add
commentary to newsreels and documentaries.
¦ Note The Audio Punch-In tool supports recording to mono tracks only.
Connection and setup
Connect the input device (microphone) to the audio input on a source device,
1
such as a preamplifier, and then connect the audio output from the source
device to the corresponding audio input on your MXO2 hardware.
¦ Note
The Matrox hardware audio inputs are line level. Therefore, make sure
your audio equipment output matches.
From the Apple menu, click System Preferences , and then click the
2
Matrox Utilities
) button to open the Matrox Utilities
icon.
Working with Avid Media Composer and Symphony
on page 55. If you're capturing
on page 66.
117