Adding A Voice-Over To Your Sequence - Matrox MXO2 Installation And User Manual

86

Adding a voice-over to your sequence

Matrox MXO2 supports voice-over in Adobe Premiere Pro, which allows you to
record audio tracks as .wav files to add commentary to video clips, such as
newsreels and documentaries.
¦ Note
audio tracks only.
Connection and setup
Connect the microphone to the audio input on a source device, such as a
1
preamplifier, and then connect the audio output from the source device to the
corresponding audio input on your MXO2 hardware.
¦ Note
your audio equipment output matches.
If you're using a Mac OS X Lion system, proceed to step 3. For Mac OS X
2
Mavericks or Mountain Lion users, a Matrox aggregate audio device is
required for your system. If you previously created a Matrox aggregate audio
device on your system for the purposes of voice-over, proceed to step 3. To
create a Matrox aggregate audio device, perform the following steps:
a
b
c
Chapter 9, Using Matrox MXO2 with Supported Programs
Matrox voice-over supports recording to standard, mono, and adaptive
The Matrox hardware audio inputs are line level. Therefore, make sure
In the Mac OS X Finder window, choose Applications > Utilities , and
then double-click Audio MIDI Setup .
In the Audio Devices window, click
and then Create Aggregate Device .
Double-click the newly created aggregate device that appears in the left
pane, and type a descriptive name for the device, such as Matrox Audio .
at the bottom left of the dialog,