Matrox MXO2 Installation And User Manual page 111

From the Number of channels list, select 16 , and then set the Track
•
for each track in your sequence to Mono .
Type
In the Settings pane, under Audio , select 48000 Hz from the Sample
•
Rate list.
Set the remaining settings in the New Sequence dialog, and then click
b
.
OK
With your project files on the timeline, in the Audio Track Mixer , assign
c
the audio track that contains the Matrox 4VANC closed caption data on
your timeline to audio output 15 + 16 , and then use the Pan/balance
control to set the balance completely to the left (channel 15). If there is
another audio track assigned to 15 + 16 , you must set the balance for that
audio track completely to the right (channel 16). Audio track 16 can be
used for Matrox 4VANC closed caption data (see
4VANC closed captioning"
¦ Note
To preserve the integrity of the AFD data for playback, do not
manipulate the audio track that contains the AFD data in any way. For example,
do not adjust the audio gain or add audio effects to the track.
Specify your playback settings as detailed in
d
settings" on page 82.
Enable playback of Matrox 4VANC AFD in the Matrox Utilities
e
preferences window (see
Play back your sequence.
f
Exporting Matrox 4VANC AFD to a file
This section details how to maintain the Matrox 4VANC AFD data when
exporting your sequence to a file. The exported file can then be used in
Premiere Pro for playback (see
page 92).
In Premiere Pro, choose File > New > Sequence . In the New
a
Sequence
In the Tracks pane, select Multichannel from the Master list.
•
From the Number of channels list, select 16 , and then set the Track
•
Type for each track in your sequence to Mono .
In the Settings pane, under Audio , select 48000 Hz from the Sample
•
list.
Rate
Set the remaining settings in the New Sequence dialog, and then click
b
OK .
With your project files on the timeline, in the Audio Track Mixer , assign
c
the audio track that contains the Matrox 4VANC AFD data to an audio
output pair (for example, 3 + 4 ), and then use the Pan/balance control
to set the balance of the Matrox 4VANC track completely to the left or
on page 94).
"AFD capture and playback"
"Playing back Matrox 4VANC AFD"
dialog:
"Working with Matrox
"Defining your playback
on page 66).
Working with Adobe Premiere Pro
93
on