98
d
¦ Note
must set the output that is connected to your monitor to SD (see
your video output settings"
21 (SD)
e
Overlay closed captions (CC)
This section details how to overlay the closed captions that are on your
sequence on all the MXO2 video outputs for playback using Premiere Pro
CC.
¦ Note
overlay will not be exported to tape.
a
b
c
d
Overlay closed captions (CS6)
This section detailed how to overlay the closed captions that are on your
sequence on all the MXO2 video outputs for playback using Adobe Premiere
Pro CS6.
Chapter 9, Using Matrox MXO2 with Supported Programs
Specify where you want the closed caption data to be embedded in the
video signal during playback. Since MXO2 features simultaneous
outputs, you can select more than one of the following options.
Embed in SDI VANC (HD/SD)
•
back HD or SD video from MXO2's SDI output, and embed the closed
captioning data in your video's VANC.
Embed in SDI Line 21 (SD)
•
SD video from MXO2's SDI output, and embed the closed captioning
data on Line 21 of the VBI (vertical blanking interval) portion of your
video signal.
Embed in analog Line 21 (SD)
•
back SD video from any of MXO2's analog outputs (component,
S-Video, and composite), and embed the closed captioning data on
Line 21 of the VBI (vertical blanking interval) portion of your video
signal.
To preview HD video with closed captioning on an SD monitor, you
or Embed in analog Line 21 (SD) .
In Premiere Pro, specify your playback settings as detailed in
your playback settings"
Play back your sequence or export your sequence to tape.
f
The closed captioning overlay is supported for playback only. The
In Premiere Pro, specify your playback settings as detailed in
your playback settings"
From the Program monitor pop-up menu, choose Closed Captioning
Display > Enable
From the Program monitor pop-up menu, choose Overlay Settings >
Settings
, and in the Overlay Settings dialog, select Enable overlays
for Transmit
.
Play back your sequence.
Use this option if you want to play
Use this option if you want to play back
Use this option if you want to play
on page 58), and select either Embed in SDI Line
on page 82.
on page 82.
.
"Specifying
"Defining
"Defining
Need help?
Do you have a question about the MXO2 and is the answer not in the manual?