9.6
Transport motor control circuit
The transport motor is a stepping motor driven by the control signal output from the PFC CPU on the
LGC board and rotates the intermediate transport roller.
The transport motor is driven by the pulse signal (MTMA-0, MTMB-0, MTMAB-0, MTMBB-0) output
from the motor driver. These pulse signals are formed based on the reference clock signal (MTMCK-0),
and output only when the enable signal (MTMEN-0) is L level. Also, the rotation speed of the motor can
be switched by changing the output timing of each pulse signal.
LGC board
MTMCK-0
MTMRF-0
IC57
PFC CPU
MTMEN-0
Transport motor drive signal
Signal
MTMCK-0
MTMEN-0
Pulse signal
L
L
-
H
March 2005 © TOSHIBA TEC
IC39
Buffer
+5VSW
Q62
SG
Fig.9-9
Motor status
MTMRF-0
L
Rotation when accelerating/
decelerating
H
Rotation at a constant speed
-
Stop
9 - 17
MOT2-MT board
MTMA-0
MTMB-0
IC1
MTMAB-0
Motor driver
MTMBB-0
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
Transport motor
9