Feed Motor Control Circuit - Toshiba e-STUDIO520 Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO520:

Table of Contents

Feed motor control circuit

The feed motor is a DC motor driven by the control signal output from the PFC CPU and ASIC on the

LGC board and rotates the pick-up roller, feed roller, separation roller and transport roller for each

drawer, the tandem LCF and bypass unit.

When the ON/OFF signal (PFMON-0) output from the PFC CPU is L level, the feed motor is driven at a

speed based on the frequency of the reference clock signal (PFMCK-1) output from the ASIC.

e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM

E-studio600 E-studio720 E-studio850