Toshiba e-STUDIO520 Service Manual page 144

[G] Lens unit
(1) Take off the lens cover
( P.6-16 "[B] Lens cover"]).
Disconnect 1 connector, remove 4 screws
and remove 2 washers to take out the lens
unit.
Notes:
1. When replacing the lens unit, do not
touch 10 screws denoted with arrows in
the figure.
2. Handle the unit with extra care. Do not
touch the adjusted area or lens.
e-STUDIO520/600/720/850 SCANNING SECTION
Lens unit
6 - 20
Fig.6-29
Fig.6-30
Fig.6-31
March 2005 © TOSHIBA TEC