Toshiba e-STUDIO520 Service Manual page 211

[G-3] Paper dust removal brush 1 (for the rubber registration roller)
(1) Remove 1 screw and take off the paper dust
removal brush.
[H] Paper dust removal brush 2 (for the metallic registration roller)
(1) Take off the developer unit.
( P.12-19 "[C] Developer unit")
(2) Remove 1 screw and take off the paper dust
removal brush.
[I] Registration motor (M16)
(1) Take off the SYS board.
( P.2-47 "[L] Rear cover")
(2) Remove 3 screws and take off the flywheel.
(3) Remove 3 screws and take off the motor with
the bracket.
(4) Remove 2 screws and take off the motor.
March 2005 © TOSHIBA TEC
Paper dust removal brush-1
Fig.9-62
Paper dust removal brush-2
Fig.9-63
Registration motor
Screw
Fig.9-64
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
9 - 37
Screw
9