Toshiba e-STUDIO520 Service Manual page 315

(4) Remove 2 screws and take off the stay.
(5) Disconnect each connector, remove each
screw and take off the thermistor and ther-
mostat.
Notes:
1. When installing the thermostats, be care-
ful not to deform the thermostats and their
brackets.
2. Adjust the gap between each thermostat
and the fuser roller to be 2.0-2.5 mm.
March 2005 © TOSHIBA TEC
Screw
Fig.14-30
Thermistor Thermostat
Screw
Fig.14-31
2.0~2.5mm
Heat roller
Fig.14-32
e-STUDIO520/600/720/850 FUSER UNIT
14 - 25
Stay Screw
Thermistor
Screw
Screw
Thermostat
14