Toshiba e-STUDIO520 Service Manual page 142

[D] SLG board cooling fan (M23)
(1) Take off the lens cover
( P.6-16 "[B] Lens cover").
(2) Disconnect 1 connector and remove 2
screws to take off the SLG board cooling fan.
[E] Exposure lamp (EXP)
(1) Take off the top rear cover
( P.2-44 "[E] Top rear cover").
(2) Take off the original glass
( P.6-15 "[A] Original glass").
(3) Move the carriage-1 to the left side.
(4) Disconnect the connector, release the clamp
and remove 1 screw of the exposure lamp.
e-STUDIO520/600/720/850 SCANNING SECTION
SLG board cooling fan
6 - 18
Fig.6-23
Carriage-1
Fig.6-24
Fig.6-25
March 2005 © TOSHIBA TEC