Toshiba e-STUDIO520 Service Manual page 435

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO520:

Table of Contents

Remove 2 screws to take off the large origi-

nal exit guide.

Be careful not to smudge the opening of the

Remove 1 screw and disconnect 1 connec-

tor. Then take off the large original exit sen-

sor with its holder.

Remove 1 screw and take off the large origi-

nal exit sensor from its bracket.

[G-10] Read sensor (S69)

Take off the ADF left cover

P.16-86 "[B-3] ADF left cover").

Remove 1 screw to take off the read sensor

with its bracket.

Disconnect 1 connector and remove 1 screw.

Then take off the read sensor from its

Large original exit sensor

e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)

Large original exit guide

E-studio600 E-studio720 E-studio850