Process Of Original Size Detection - Toshiba e-STUDIO520 Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO520:

Table of Contents

Process of original size detection

1) When the equipment is in the original size detection mode, the carriage-1 is set at its home position.

2) When the RADF is opened, the sensors receive the light reflected from the original and if one of the

matrix conditions shown in 4) for original sizes is satisfied, the size of the original is instantly

3) The output signal from each sensor is input to the CPU on the scanner control PC board to deter-

mine the size of the original.

[ A4 Series ]

Reflection type

[ LT Series ]

Reflection type

e-STUDIO520/600/720/850 SCANNING SECTION

E-studio600 E-studio720 E-studio850