Toshiba e-STUDIO520 Service Manual page 316

[H] Fuser roller
(1) Take off the fuser unit
( P.14-18 "[B] Fuser unit").
(2) Take off the cleaning web unit
( P.14-19 "[C] Cleaning web unit / Clean-
ing web").
(3) Loosen 2 pressure screws completely.
(4) Remove 2 screws and take off the fuser unit
cover (rear).
(5) Open the lower separation finger unit
( P.14-24 "[F] Lower separation finger unit
/ Lower separation finger").
(6) Remove 2 screws and open the entrance
guide unit.
(7) Remove 2 screws, release 2 harness clamp
and take off the bracket with releasing the
catching section.
e-STUDIO520/600/720/850 FUSER UNIT
Fuser unit cover ( rear )
Screw
Screw
14 - 26
Pressure screw
Fig.14-33
Entrance guide unit
Fig.14-34
Bracket
Harness clamp
Fig.14-35
March 2005 © TOSHIBA TEC
Screw