Toshiba e-STUDIO520 Service Manual page 213

(3) Release 2 gear latches and remove the gear.
(4) Remove 3 screws and take off the tandem
LCF end fence motor.
[J-3] Tandem LCF end fence solenoid (SOL8)
(1) Remove 4 screws and take off the bracket.
(2) Remove 1 screw and take off the tray-up unit
side wall.
(3) Remove 2 screws, disconnect 1 connector,
and take off the tandem LCF end fence sole-
noid.
March 2005 © TOSHIBA TEC
Latch
Fig.9-68
Fig.9-69
Bracket
Tandem LCF
end fence solenoid
Fig.9-70
e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
9 - 39
Gear
Tandem LCF
end fence motor
Side wall
9