Separator Sheets
None
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x]
Manual Feeder
Blank Pages
Do Not Print
Print
Print Settings
Setup menu
Menu item
Printer Language
PS Emulation
PCL Emulation
Job Waiting
Off
On
Specifies whether blank separator sheets are inserted
Notes:
•
None is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job if Collate is set
to On. If Collate is set to Off, then a blank page is inserted between each set of printed
pages, such as after all page 1's and after all page 2's.
•
Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of the print job. This setting
is useful when printing transparencies or when inserting blank pages in a document
for notes.
Specifies the paper source for separator sheets
Notes:
•
Tray 1 is the factory default setting.
•
From the Paper menu, Configure MP must be set to Cassette in order for Multipurpose
Feeder to appear as a menu setting.
Specifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Description
Sets the default printer language
Notes:
Specifies if print jobs are removed from the print queue when they
require unavailable printer options or custom settings. These print
jobs are stored in a separate print queue, so other jobs print
normally. When the missing information and/or options are
obtained, the stored jobs print.
Notes:
Understanding printer menus
•
PS Emulation is the factory default setting. PostScript
emulation uses a PS interpreter for processing print jobs.
•
PCL Emulation uses a PCL interpreter for processing print
jobs.
•
Setting a printer language default does not prevent a
software program from sending print jobs that use another
printer language.
•
Off is the factory default setting.
•
This menu item appears only if a non-read-only printer hard
disk is installed. This requirement ensures that stored jobs are
not deleted if the printer loses power.
204