Printing In Black And White; Adjusting Toner Darkness; Supported Finishing Features - Lexmark X790 Series User Manual

> Reports > Print Directory
Printing print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and
3
Release the buttons when the screen with the progress bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears.
4
Touch Print Quality Pages Menu > Print Quality Pages.
5
Touch Exit Config Menu to return to the home screen.

Printing in black and white

From the home screen, navigate to:
> Settings > Print Settings > Quality Menu > Print Mode > Black Only > Submit

Adjusting toner darkness

1
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Settings > Print Settings > Quality Menu > Toner Darkness.
3
Adjust the toner darkness setting.
4
Click Submit.

Supported finishing features

The printer supports the following finishing features:
•
Stacker
•
StapleSmart finisher
•
Two-, Three-, or Four-hole punch
•
5-Bin mailbox
6 while turning the printer on.
MNO
Printing
86