Miscellaneous Security Settings Menu - Lexmark X790 Series User Manual

Miscellaneous Security Settings menu

Menu item
Login Restrictions
Login failures
Failure time frame
Lockout time
Panel Login Timeout
Remote Login Timeout
Security Reset Jumper
Access controls="No Security"
No Effect
Reset factory security defaults
LDAP Certificate Verification
Demand
Try
Allow
Never
Minimum PIN Length
1–16
Description
Limits the number and time frames of failed login attempts from the printer control
panel before all users are locked out
Notes:
•
"Login failures" specifies the number of failed login attempts before users are
locked out. Settings range from 1–10 attempts is the factory default setting.
•
"Failure time frame" specifies the time frame during which failed login attempts
can be made before users are locked out. Settings range from 1–60 minutes. 5
minutes is the factory default setting.
•
"Lockout time" specifies how long users are locked out after exceeding the
login failures limit. Settings range from 1–60 minutes. 5 minutes is the factory
default setting. 1indicates the printer does not impose a lockout time.
•
"Panel Login Timeout" specifies how long the printer remains idle on the Home
screen before automatically logging the user off. Settings range from 1–900
seconds. 30 seconds is the factory default setting.
•
"Remote Login Timeout" specifies how long a remote interface remains idle
before automatically logging the user off. Settings range from 1–120 seconds.
10 minutes is the factory default setting.
Changes the value of the security settings
Notes:
•
Access controls="No Security" retains all the security information that the user
has defined. "No Security" is the factory default setting.
•
"No Effect" means the reset has no effect on the device's security configuration.
•
"Reset factory security defaults" deletes all security information that the user
has defined, and assigns the factory default value to each setting in the
Miscellaneous Security Settings section of both the panel and the Web page.
Allows the user to request a server certificate
Notes:
•
"Demand" means a server certificate is requested. If a bad certificate is provided
or if no certificate is provided, the session is terminated immediately. "Demand"
is the factory default setting.
•
"Try " means a server certificate is requested. If no certificate is provided, the
session proceeds normally. If a bad certificate is provided, the session is
terminated immediately.
•
"Allow" means a server certificate is requested. If no certificate is provided, the
session proceeds normally. If a bad certificate is provided, it will be ignored and
the session proceeds normally.
•
"Never" means no server certificate is requested.
Limits the digit length of the PIN.
Note: 4 is the is the factory default setting.
Understanding printer menus
161