Set Date And Time Menu - Lexmark X790 Series User Manual

Menu item
Configure Log
Enable Audit
No
Yes
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7

Set Date and Time menu

Menu item
Current Date and Time
Manually Set Date and Time
[input date/time]
Time Zone
[list of time zones]
Automatically Observe DST
On
Off
Custom Time Zone
UTC Offset
DST Start Week
DST Start Day
DST Start Month
DST Start Time
DST End Week
DST End Day
DST End Month
DST End Time
DST Offset
Enable NTP
On
Off
Description
Specifies whether and how audit logs are created
Notes:
•
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
•
Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
•
Remote Syslog Facility determines the value used to send logs to the remote
syslog server. 4 is the factory default setting.
•
With the security audit log activated, the severity value of each event is
recorded. 4 is the factory default setting.
Description
Lets you view the current date and time settings for the printer
Lets you set the date and time for the printer.
Note: Date and time are set in YYYY-MM-DD HH:MM format.
Lets you set the time zone for the printer.
Note: GMT is the factory default setting.
Enables Daylight Saving Time associated with the set time zone.
Note: On is the factory default setting.
Sets a custom time zone.
Enables Network Time Protocol, which synchronizes the clocks of devices on a
network
Notes:
•
On is the factory default setting.
•
Use this recommended date and time setting.
Understanding printer menus
164