Scanner Disabled By Admin - Lexmark X790 Series User Manual

Notes:
•
Repeat this procedure multiple times until the print remains faded. When the print remains faded, replace the
cartridge.
•
Have a new cartridge available when the current one no longer prints satisfactorily.
88.xx [Color] cartridge very low
The specified print cartridge is very low.
1
For instructions on replacing a print cartridge, from the printer control panel touch More Information.
2
Touch Continue to clear the message and continue printing.
88.xx [Color] cartridge critically low
The specified print cartridge is critically low.
1
For instructions on replacing a print cartridge, from the printer control panel touch More Information.
2
Touch Continue to clear the message and continue printing.

840.01 Scanner disabled by admin

Print without the scanner or contact your system support person.
840.02 Scanner disabled. Contact system administrator if problem
persists.
The printer identified a problem with the scanner and automatically disabled it. Try one or more of the following:
1
Remove all pages from the ADF.
2
Turn the printer off.
3
Wait for 15 seconds, and then turn the printer on.
Note: If turning the printer off and then on again does not clear the message, then touch Continue with scanner
disabled to return to the home screen, and then contact your system support person.
4
Place the document in the ADF, and then adjust the paper guides.
5
From the home screen, touch Copy, or use the keypad to enter the number of copies.
6
Change the copy settings as needed.
7
Touch Copy It.
1565 Emulation error, load emulation option
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.
To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.
Troubleshooting
269