Factory Defaults; Copy Settings Menu - Lexmark X790 Series User Manual

Menu item
Print Recovery
Page Protect
Off
On
Press Sleep Button
Sleep
Hibernate
Do nothing
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate

Factory Defaults

Do Not Restore
Restore Now

Copy Settings menu

Menu item
Content Type
Text/Photo
Text
Graphics
Photo
Description
Lets the printer successfully print a page that may not have printed
otherwise
Notes:
•
Off is the factory default setting. Off prints a partial page when
there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
Determines how the scanner, while in Idle state, reacts to a short
press of the Sleep button
Note: Sleep is the factory default setting.
Determines how the scanner, while in Idle state, reacts to a long
press of the Sleep button
Note: Do nothing is the factory default setting.
Returns the printer settings to the factory default settings
Notes:
•
Do Not Restore is the factory default setting. Do Not Restore
keeps the user-defined settings.
•
Restore Now returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted. Downloads stored in flash memory
or on a printer hard disk are not affected.
Description
Specifies the type of content contained in the copy job
Notes:
•
Text/Photo is the factory default setting. Text/Photo is used when the original
document is a mixture of text, graphics, and photos.
•
Text is used when the content of the original document is mostly text or line art.
•
Graphics is used when the original document is mostly business-type graphics
such as pie charts, bar charts, and animations.
•
Photo is used when the document being scanned is mostly a photo or an image.
Understanding printer menus
172