Menu item
Portrait Height
3–48 inches
76–1219 mm
Feed Direction
Short Edge
Long Edge
Bin Setup menu
Menu Item
Output Bin
Standard Bin
Bin [x]
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type Assignment
Overflow Bin
Standard Bin
Bin [x]
Description
Sets the portrait height
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the US factory default setting. 356 mm is the international
factory default setting.
•
The height can be increased in 0.01-inch or in 1-mm increments.
Specifies the feed direction
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Description
Specifies the default output bin
Note: Standard Bin is the factory default setting.
Specifies configuration options for output bins
Notes:
•
•
•
•
•
Specifies an alternate output bin when a designated bin
is full
Note: Standard Bin is the factory default setting.
Understanding printer menus
145
Mailbox is the factory default setting. This setting
treats each bin as a separate mailbox.
Link configures all available bins as one large output
bin.
Link Optional links together all available output bins
except the standard bin and only appears when at
least two optional bins are installed.
Type Assignment assigns each paper type to an
output bin or linked bin set.
Bins assigned the same name are automatically linked
unless Link Optional is selected.