Dial Prefix; Automatic Redial - Lexmark X790 Series User Manual

Menu item
Content Source
Color Laser
Inkjet
Magazine
Press
Black/White Laser
Photo/Film
Newspaper
Other
Darkness
1–9

Dial Prefix

Dialing Prefix Rules
Prefix Rule [x]

Automatic Redial

0–9
Redial Frequency
1–200
Behind a PABX
No
Yes
Enable ECM
Yes
No
Enable Fax Scans
On
Off
Driver to fax
Yes
No
Allow Save as Shortcut
On
Off
Dial Mode
Tone
Pulse
Description
Specifies how the output is produced
Notes:
•
Color Laser is the factory default setting. Color Laser is used when the original
document was printed using a color laser printer.
•
Black/White is used when the original document was printed using a
black/white laser printer.
•
Inkjet is used when the original document was printed using a inkjet printer.
•
Photo/Film is used when the original document is a photo from film
•
Magazine is used when the original document is from a magazine.
•
Newspaper is used when the original document is from a newspaper.
•
Press is used when the original document was printed using a printing press.
•
Other is used when the original document was printed using an alternate or
unknown printer.
Lightens or darkens the output
Note: 5 is the factory default setting.
Lets you enter a dialing prefix, such as 99. A numeric entry field is provided.
Establishes a dialing prefix rule
Specifies the number of times the printer tries to send the fax to a specified number
Note: 5 is the factory default setting.
Specifies the number of minutes between redials
Enables switchboard blind dialing without a dial tone
Enables Error Correction Mode for fax jobs
Lets you fax files that are scanned at the computer
Allows the driver to fax jobs to be sent by the printer
Lets you save fax numbers as shortcuts in the printer
Specifies the dialing sound, either as a tone or a pulse
Understanding printer menus
182