Removing and installing exhaust
manifolds
•
Slacken the clamp holding the front silencer.
•
Remove fasteners securing exhaust manifold.
•
Remove exhaust manifold.
•
Installation is the reverse of the removal proce-
dure.
e
Caution:
After a trial run, read out Motronic fault memory.
Note position of wiring for oxygen sensor.
X
Tightening torque:
Clamp, manifold to front silencer
(apply Never Seeze to clamp seat)
Exhaust manifold to cylinder head ............... 21 Nm
18.4
............... 45 Nm