Removing And Disassembling Crown Wheel - BMW R 1150 GS Repair Manual

h
100
Removing and disassembling crown
wheel
•
Remove housing cover (1) with crown wheel (2)
and bearing (3).
•
Heat housing cover to 100 °C (212°F) and pull it
off.
•
Force shaft seal (4) out of housing cover with
drift.
33 1 830
•
Clamp crown wheel in vise with protective jaws.
•
Insert thrust block (arrow), BMW No. 00 7 511.
•
Use puller, BMW No. 33 1 830, to pull off the
grooved ball bearing.
1
4
00 7 511
•
Insert thrust block, BMW No. 11 0 561.
•
Using puller, BMW No. 00 7 500, pull taper roller
bearing off crown wheel.
•
Turn the housing upside down and heat it until
the outer ring is released and drops out
(max. 100 °C/212 °F).
KR330180
00 7 500
11 0 561
3
2
S330080
R21330100
33.11