Removing And Installing Handlebar - BMW R 1150 GS Repair Manual

Removing and installing handlebar

•
Remove left and right handlebar fittings.
•
Remove handlebar.
•
Installation is the reverse of the removal proce-
dure.
e
Caution:
Make sure that all lines and cables are correctly
routed.
Align the punch mark on the handlebar with the gap
between the clamp blocks.
X
Tightening torque:
Clamp to fork bridge .................................... 21 Nm
Handlebar weight to handlebar..................... 21 Nm
32.10
R21320030