Removing And Installing Seat Lock; Removing And Installing Lock Barrel; Removing And Installing Helmet Lock - BMW R 1150 GS Repair Manual

Removing and installing seat lock

Removing and installing lock barrel

•
Remove luggage rack.
•
Remove seat lock.
•
Disassemble seat lock on key side (2 screws)
and carefully spread it open.
•
Press the keeper (arrow) of the lock barrel into
the housing and use the key to pull out the barrel.
•
Lubricate the new lock barrel with Shell
Retinax A.
•
Press lock barrel in until keeper engages.
•
Installation is the reverse of the removal proce-
dure.

Removing and installing helmet lock

R21510040
•
Open the retainer.
•
Remove the helmet lock.
•
Use a screwdriver to pry off the cap on the in-
side.
•
Remove the spring and the hook.
•
Press the keeper of the lock barrel into the hous-
ing and use the key to pull out the barrel.
•
Lubricate the new lock barrel with Shell
Retinax A.
•
Press lock barrel in until keeper engages.
•
Installation is the reverse of the removal proce-
dure.
GS510070
GS510080
51.5