Removing and installing front brake
caliper
e
Caution:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle as brake fluid de-
stroys paint.
•
Drain the brake system.
•
Disconnect brake line (1).
•
Remove screws securing the brake caliper.
•
Force back the brake pads and pistons (arrows).
e
Caution:
Do not damage brake pads.
•
Carefully remove the brake caliper.
•
Installation is the reverse of the removal procedure.
•
Force back the brake pads and pistons.
•
Fill and bleed the brake system.
.................................................... see Group 00
a
e
Caution:
Replace the sealing rings (2) in the brake line.
Do not damage brake pads.
X
Tightening torque:
Brake caliper to fork slider tube.................... 40 Nm
Brake hose to brake caliper ......................... 18 Nm
Bleed screw to brake caliper ....................... 14 Nm
34.4
1
2
RS340021
RS340050