Removing And Installing Roll-Over Valve - BMW R 1150 GS Repair Manual

4
6
Removing and installing roll-over
valve
e
Caution:
Fuel is flammable and a hazard to health.
Observe relevant safety regulations.
•
Drain fuel tank, if necessary.
•
Remove the fuel filler cap.
•
Remove the reducer unit with roll-over valve (1)
and disconnect the hoses.
•
Remove the roll-over valve.
•
Installation is the reverse of the removal proce-
dure.
•
Secure non-reusable hose clips with pliers,
BMW No. 13 1 500.
16.6
5
2
3
e
Caution:
Make sure that O-ring seal (2) is correctly seated.
After installing, check fuel filler cap for leaks.
1
R21160010