Ubios - Interactive Mode - Teknor Industrial Computers TEK-CPCI-1000 Technical Reference Manual

TEK-CPCI-1000 Technical Reference Manual

15.2 UBIOS - INTERACTIVE MODE

To run the program in interactive mode, type "UBIOS" from the DOS prompt and the
following screen will be displayed:
This is simply a presentation screen. To continue, hit any key on the keyboard. This brings
you to the main menu.
In VT100 mode, type "UBIOS /VT", leaving a space between "UBIOS" and "/VT".
If you have a monochrome monitor or a CGA monitor, type "UBIOS/low", for low
resolution.
The presentation screen in low resolution or VT100 mode is different from the one appearing
above, but it works the same way. To continue, you must hit a key on the keyboard, which
brings you to the main menu.
15-2