Replacing the Presser Foot
Always make sure to press the lockout key to lockout the
machine or turn the power switch off before replacing the
Raise the needle by pressing the needle up/down button.
Press the lockout key.
q Lockout key
Raise the presser foot lifter.
w Presser foot lifter
Press the black lever on the backside of the foot holder.
The presser foot will snap off.
To avoid damaging the lever, do not push it down.
Place the desired foot under the foot holder so that the
pin of the foot lies just under the groove of the foot holder.
Lower the presser foot lifter to lock the foot in place.
Each foot is marked with an identification letter.
y Identification letter