Starting To Sew Embroidery - ELNA eXpressive 860 Instruction Manual

w
e

Starting to sew embroidery

Select the desired pattern.
Press the jog/stitch key to show the jog keys.
q Jog/stitch key
q
Adjust the hoop position with the jog keys so that the
needle position comes right above the center of the
centerlines on the fabric.
Press the start/stop button and sew 5 to 6 stitches.
Press the start/stop button again to stop the machine.
Raise the presser foot, cut the loose thread close to the
beginning of the starting point.
w Loose thread
Lower the presser foot and press the start/stop button to
start sewing again.
The machine will stop (and trim the threads if the auto
thread cutting is activated) automatically when the first
color section is finished.
Change the thread to the next color and sew the next
section.
Sewing results
The embroidery pattern is sewn against the centerlines
on the fabric as shown.
e Centerlines on the fabric
NOTE:
Refer to page 116 for how to set auto thread cutting.
104