Special Bobbin Holder For Embroidery - ELNA eXpressive 860 Instruction Manual

q
w
r
e

Special Bobbin Holder for Embroidery

Replace the standard bobbin holder with the special
bobbin holder for embroidery when using bobbin threads
other than Janome bobbin thread for embroidery.
NOTE:
The special bobbin holder is marked with a yellow dot for
identification.
q Yellow dot
Remove the needle plate (refer to the previous page).
Take out the standard bobbin holder.
w Standard bobbin holder
Insert the special bobbin holder into the hook race.
Make sure to match the knob of the bobbin holder with
the stopper on the machine.
Attach the needle plate.
e Knob
r Stopper
NOTE:
Use the standard bobbin holder when sewing lace
designs and quilting designs that use the same thread for
the bobbin as the needle thread.
89