Download  Print this page

B7 Darning - ELNA eXpressive 860 Instruction Manual

Hide thumbs


0.9 cm

B7 Darning

z Attach the automatic buttonhole foot R and pull the
button holder all the way out.
x Start the machine and sew to the required length, then
press the reverse button. This sets the darning length.
Continue sewing until the machine stops automatically.
q Required length
c Sew another layer of darning over the first layer, at a
right angle to it.
The maximum darning length is 2 cm (3/4˝) and the
maximum width is 0.9 cm (3/8˝).
To sew the same size darning
When sewing is finished, a confirmation message will
Simply start the machine to sew another layer of darning
in the same size.
To sew the next layer of darning in a different size, press
the X key.
To adjust the evenness of darning stitches:
You can correct unevenness of darning stitches by
pressing the "–" or "+" key in the adjusting window.
If the left corner is lower than the right side, press the "–"
key to correct it, and vice versa.
See page 70 for sewing instructions of B8 Tacking.


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: