Tacking - ELNA eXpressive 860 Instruction Manual

q
w

Tacking

Tacking is used to reinforce pockets, crotches and belt
carriers where extra strength is needed.
There are 3 auto tacking sizes and manual tacking
available.
Attach satin stitch foot F.
Auto tacking
Lower the needle at the starting point and start sewing.
The machine will sew the tack of the selected size and
stop automatically when it is finished.
q Starting point
Manual tacking
Start the machine and sew to the required length, then
press the reverse button. This sets the tack length.
Continue sewing until the machine stops automatically.
w
w Required length
NOTE:
The maximum length of tacking is 1.5 cm (5/8˝).
To sew the same size tack
To sew another tack in the same size, simply start the
machine and sew until the machine stops automatically.
To sew the next tack in a different size, press the X key.
70