Download  Print this page

Attaching The Straight Stitch Needle Plate - ELNA eXpressive 860 Instruction Manual

Hide thumbs



Attaching the Straight Stitch Needle Plate

Use the straight stitch needle plate for embroidery.
Raise the needle and presser foot. Press the lockout key.
q Lockout key
Remove the extension table.
Push down the needle plate release lever and the needle
plate will snap off.
A message will appear warning that the needle plate is
not secured.
Remove the needle plate.
w Needle plate release lever
Place the straight stitch needle plate in the opening for
the needle plate.
Match the left edge of the needle plate with the opening.
Push the mark on the needle plate down until it locks in
The warning message disappears and a confirmation
message will appear.
Press the X key and the machine automatically selects
the straight stitch.
Raise the presser foot to the extra lifted position for easy
removal and attachment of the needle plate.


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: