ELNA eXpressive 860 Instruction Manual page 105

• Color section key
Press this key to show the complete image of the selected
design or partial image of each color section only.
To view the next color section, press the next page key.
You can sew only the specific color section by pressing
the next page key until the desired section is displayed.
q Color section key
w Next page key
q
• Hoop back key
w
Raise the needle by pressing the needle up/down key, if
the needle is in down position.
Press the hoop back key and hoop back option window
will open.
Press one of the keys to move the carriage
to a standby position.
To move the carriage back to the home position, press
the key and a warning message will appear. Press
e
the OK key and the carriage will go back to the home
position.
e Hoop back key
NOTE:
The feed dog will not be raised automatically.
• Adjust key
When pressing this key open the manual setting window.
You can adjust the following settings in this window.
r Adjust key
Auto thread tension level
Press the "+" or "–" key to adjust the thread tension to
your preference.
Tail length of jump thread cutting
r
This option is valid when the "jump thread cutting length"
setting is activated.
Press the "+" or "–" key to minimize the tail length of jump
thread.
101