ELNA eXpressive 860 Instruction Manual page 81

q
w
e
r
t
z x
v
b
c
n
77
Common Setting Mode
q Screen Contrast
You can adjust the contrast of the visual touch screen by
pressing the "+" or "–" key.
Sound Volume
w
The buzzer sound can be adjusted by pressing the "+" or
"–" key.
Set the value to "0" to mute the buzzer.
e Inch/mm Option
You can set your machine's measurement unit to either
inches or millimeters by pressing the "inch" or "mm" icon
key.
The default unit is millimeters.
Press the next page key to show the next menu.
r Standby Timer
The sewing lights will turn off, the visual touch screen
will go dark and the machine will be in standby mode if
you have not used the machine within the time period set
by this timer. Doing any operation will turn the lights and
screen on again.
The standby timer can be set from 1 to 30 minutes.
If you wish to turn off the timer, press and hold the "+" key
until "OFF" shows in the timer window.
t Touch Screen Calibration
You can calibrate the key positions of the touch screen if
you feel the touch screen key is not responding properly.
Press the YES key to open the calibration window.
Press the "+" sign with the touch panel stylus as the sign
appears ( z - b ).
When you press the last sign, the screen shows "END" n
and the calibration window will close.