Correcting Deformed Stitch Patterns - ELNA eXpressive 860 Instruction Manual

(–)
(+)
(–)
(+)
(+)
(–)

Correcting Deformed Stitch Patterns

The sewing results of the stretch stitch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of the fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you
wish to use.
If decorative stitch patterns, letters, numbers or the
q manual buttonhole stitch are deformed, correct them with
the feed balancing dial.
Remove the cap by using the screwdriver etc. Make sure
not to scratch the machine body with the screwdriver.
q Cap
Decorative stretch stitch patterns
If the pattern is compressed, turn the dial in the direction
of "+".
If the pattern is drawn out, turn the dial in the direction of
"–".
Letters and numbers
If the pattern is compressed, turn the dial in the direction
of "+".
If the pattern is drawn out, turn the dial in the direction of
"–".
Stitch balance of the stretch buttonhole (B6)
The stitch balance of the right and left rows of the stretch
buttonhole may vary depending on sewing conditions.
If the stitches are not balanced, correct the unevenness
with the feed balancing dial.
If the right row is denser, turn the dial in the direction
of "+".
If the left row is denser, turn the dial in the direction
of "–".
NOTE:
Return the feed balancing dial to the neutral position
and attach the cap when the sewing is finished.
83