Download  Print this page

Applique Designs - ELNA eXpressive 860 Instruction Manual

Hide thumbs

Advertisement

Applique designs

Patterns RE20a-2 and -3 are special designs for machine
embroidery applique.
You can attach applique piece to background fabric and
embroider applique design at the same time.
Example: Applique design RE20a-2
Prepare background fabric and applique fabric.
Select applique design RE20a-2 and set the background
fabric to the hoop.
Attach the hoop to the carriage and press the trace key.
Press the
key to select trace and baste (single).
Start the machine to mark around embroidery design with
basting stitches.
Cut the applique fabric the same size as the marked area.
Place the applique piece on the marked area and sew the
first section (color).
NOTE:
Pin the applique piece or use spray adhesive to fix the
applique piece in place as necessary.
Remove the hoop from the machine, but do not unhoop
the fabric.
Remove the basting stitches. Cut away the excess
applique fabric as close to the seam line as possible.
Attach the hoop to the machine again.
Sew the remaining sections (colors) of the applique
design.
106

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: