Table of Contents
Advertisement
q
w
w
e
r
q
w
e
Startover key
This is a 2-way function key to start sewing a pattern
combination over from the beginning.
When you stop sewing a pattern combination, the
startover key is activated.
The key shows a triangle and single bar that means the
machine will start over from the current pattern.
When you press the startover key, the key will change and
show a triangle and double bar that means the machine
will start over from the first pattern of the combination.
Current pattern startover
If you wish to start sewing from the beginning of the cur-
rent pattern, press the startover key once and start the
machine.
q Startover key (current pattern)
w Current pattern
First pattern startover
If you wish to start sewing from the beginning of the first
pattern of the combination, press the startover key twice
and start the machine.
e Startover key (first pattern)
r First pattern
NOTE:
If auto thread cutting is done, the machine will
startover from the first pattern.
Checking pattern combination length
You can check the total length of the pattern combination
by pressing the pattern combination key w indicated in
the manual setting window. To enter the manual setting
window, press the adjust key q.
The readout of the total length is a theoretical value
and the actual length may vary depending on sewing
conditions.
For example, program pattern P1 three times, and sew a
pattern combination.
If the actual length differs considerably from the readout,
measure the actual length and enter the nearest value by
pressing the “ + ” or “–” key.
e Actual length
The readout is adjusted automatically when calculating
the length of other pattern combinations (combination of
patterns P1 X 3 for example).
Page 55
- Quick Links:
- File Management
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
