q Font selection key
Press this key to open the font selection window.
w Lettering orientation key
Press this key to select the horizontal or vertical
e Letter size key
You can select the following 3 letter sizes by pressing this
The approximate letter sizes of upper case are as
30 mm (1.2˝)
20 mm (0.8˝)
10 mm (0.4˝)
r Letter case key
Pressing this key changes the letter case from upper
case to lower case and vice versa.
t Save file key
Pressing this key opens the save file window and allows
you to save the text or monogram as a file.
y Delete key
Press this key to delete the character above the cursor.
u Cursor key
Press these keys to move the cursor to the left or right.
i OK key
Press this key to confirm your entry and open the
o Space adjust key
This key is activated only when a space is entered.
If the spaces between characters look uneven, insert a
blank space between characters and adjust the space
width to justify.
Press this key to open the space adjustment window.
To increase the space width, press the "+" key.
To decrease the space width, press the "–" key.
The space width is shown only in millimeters.